Products & Services » Rust Proofing » Ultratect Surface Class 7

Ultratect Surface Mining Class 7

(Order Code:- US7) 

Beam Ultratect Surface Mining Class 7 has been specifically developed for vehicles and mobile assets deployed in surface mining operations throughout Western Australia. The treatments are a combination of impact and chemical resistant epoxies and traditional wax and dry film compounds. The Ultratect range represents leading edge coating technology and designed to ensure long-lasting corrosion protection..

Below is a guide to a typical Application. ( Note: This may vary depending upon vehicle type )

Application Guide:

Beam ML702 is a heavy duty dry film corrosion preventative compound which is spray applied to:

  • Inside Door cavities, Pillars, Rocker Panels and Box Sections.
  • Behind headlight and grille areas
  • Inside Bonnet & Boot lid stiffeners and tailgate areas.
  • Brake, Fuel, Hydraulic and Transmission Lines and fittings.
  • Internal Cab Floor
  • Inside Chassis rails
  • Inside Plenum Chamber.
Ultratect "Beamastic" is a chemical and abrasion resistant high build epoxy mastic coating which is spray applied to:
  • The complete under body and chassis
  • Lower cavities of the front and rear guards.
  • Wheel arches, fuel, air and hydraulic tanks
  • Engine sump, transfer casing, drive line,axles and differentials.
  • Suspension components, brake housings and steering arms.
  • Fixing points for tow bars, bull bars and side steps.
Ultratect “DURON" is a 2K Teflon/Polyurethane chemical and corrosion resistant dry film clearcoat which is spray applied to:
  • Underside of bonnet
  • Painted areas of the engine compartment.
  • Alloy engine components.

 

Options and related Treaments
  • CATIII Electronic Anti-Corrosion System - For a complete anti-corrosion solution you should consider the advantages of installing a CAT System. Electronic Anti-Rust Systems can protect all those areas of your vehicle that cannot or shouldnt be sprayed with chemical rustproofing - Please enquire.  
  • Underbody or Upperbody only treaments may be more suitable in some situations - please enquire. 
  • Some or all of the exterior painted surfaces can be coated with our  Ultratect "DURON" 2K Teflon/Polyurethane Clearcoat to provide long-term protection against attack by water, acids and most chemicals. This product is ideal for Roofs, Gutters, doors, Bonnets, Side steps, Bull bars in fact its applications are almost unlimited. Ultratect "DURON" is UV stable (will not go yellow) and will not significantly change the appearance of the substrate. It can also be removed or repaired easily at any time if required.
  • Rhino Lining - Polyurethane spray-on tray and surface coating - Ideal for inside load areas and to encapsulate and permanently protect high impact areas such as bull bars, side steps, internal floor pans, mudguards, wheel arches, chassis rails and most underbody components. Rhino Lining can be sprayed to any thicknessis, is slip resistant, prevents Rust and Corrosion, is Waterproof and chemical resistant and will not be damaged by flying debris or rocks - please enquire about how our Rhino Lining product can protect your vehicle. 


Application Time : (3 DAYS)


(Note: The above specification was last revised 7/7/2012 and should be used as a guide only. Some procedures may be altered or omitted for specific vehicle types or due to special customer requests. Beam reserves the right to alter this specification at any time without notice if new products or techniques become available.

Australian owned and operated for over 80 Years Site Map | Privacy Statement | Quality Statement
Our Partners
Rhino Lining, Ute Tray MTA Defense Pak Ming Motor One VPS